Instructions for use：
1.After the lacquer is polished with coarse wax and medium wax, the lacquer is smooth and the scratches disappear, but the gloss is low.
2.Mirror reduction wax is after the scratches on the surface are removed, due to the coarser particles of the wax, there will be some grinding marks.
3.Spread S200 fine wax evenly on the surface to be waxed.
4.Use a polishing machine with a spherical medium sponge disc (ordinary flat sponges are also available, and woolen balls or rabbit hair balls can also be used for construction. The surface of the sponge balls must be clean, and no other waxes or other substances can stick to it. On it).
5.First run the polisher at low speed for 600 rpm to completely push the wax away, go back and forth several times and then increase the gear, the speed is increased to 1400 rpm. The fastest speed is recommended to collect wax within 2200 rpm.
6.Until all the wax is collected, the brightness will increase.