Home
Categories
Polypropylene Fiber
Инженерная моноволокна PP волокна Микро волокно

Инженерная моноволокна PP волокна Микро волокно

Category: Polypropylene Fiber >>>
Seller: Anhui,Elite,Industrial,Co.,Ltd.

Price in USD:

Price:1,50 $ - 1,80 $

Quantity:

add to wishlist

Product Overview

Description

Product Description

EltFiber-Micro Synthetic fiber was produced by referring foreign advanced technology for fiber spinning, modified by addingfunctional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing,better water affinity, strong linking force. It is suited to reinforce and crack-resist to every kinds of cement concrete andmortar, specially used in engineering of building surface, floor, wall etc.....

We main have two type Micro Synthetic fiber, Elt Microfiber Monofilament and Elt Microfiber Fibrillated

Micro synthetic Fiber Monofilament

Micro Synthetic Fiber Fibrillated

Micro Synthetic Fiber Functions And Advantages

Functions:			Advantages:
Increase freezing & thawing resistance			Cost effective
Improve tendons protection			Replaces anti crack mesh reinforcement
Resist to shrink & crack			Decreases construction time and labor
Increase seepage resistance			Inhibits intrinsic cracking in concrete
Increase friction resistance			Do not rust
Replace steel net (using in plastering)			Disperses uniformly throughout the mix
Prevent mortar split and crackle expansion			Explosive spall control

Production Process

1, Raw Material Virgin PP Resin

2, Add Raw Material

3,Melting and Extrusion

4, Hang PP Yard

5,PP Yard Rolls

6, Cut to short Fiber

Specification

Compliance
ASTM C1116, Type III BS EN 14889 - 2
1, Normal Type MicroFiber Monofilament PPMF-A

*Raw Material :*	Polypropylene	*Crack Elongation:*	20+/-5%
*Fiber Type :*	Monofilament PPMF-A	*Fiber Diameter:*	20-30um
*Melting Point(C Deg.) :*	160 - 170	*Density(g/cm3) :*	0.91+/-0.01
*Acid &Alkali Resistance :*	Strong	*Tensile Strength(MPa):*	450 min.
*Length:*	Times of 4mm/5mm/ 6mm	*Water absorbency :*	NO
*Normal Length*	4mm, 6mm, 8mm,10mm, 12mm,15mm,18mm,20mm, 24mm, 30mm etc...

2,Special Type MicroFiber Monofilament
1)MicroFiber Monofilament PPMF-B:High Tensile Strength -----------600MPa Min
2)MicroFiber Monofilament PPMF-C:Superfine--------------------------------20+/-2um Dia
3)MicroFiber Monofilament PPMF-D:High dispersion---------------------Special Surface-Treating

Packing

0.6/0.9/1.0kg Per PE Film Bag

18kg/20kg Per Plastic Woven bag

9000kg/20'gp, 20000kgs/40'HQ

0.6/0.9/1.0kg/water soluble bag

18kg/Carton

7200kg.20'gp,18000kgs/40'HQ

Application

A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.

Applying Instruction:
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely. Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.

1, For Plain Concrete

2, For fiber Cement Pipe

3, For fiber Cement Board

4, Anti-Cracking of Workshop Floor

5, Anti-Cracking of Basement

6, Anti-cracking of Garage

Our Company

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all kinds of Concrete Reinforcement Fibers in the world market.

Our Product were widely used in all kinds of concrete,mortar,plaster projects and exported to more than 30 countries, Such as USA, Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.

Our Fibers was made by 100% Virgin Material with advanced equipment of yard and cutting, we have one full set of precise testing instrument, testing equipment and quality inspection team, technology research and development team. the management system was certified by ISO9001 and our products have been passed the CE Certification.