ac led ADUM1301ARWZ-RL ic chip manufacture

Share on:

Price in USD:
Price:

Quantity:


Product Overview

Description





Manufacturer:
Texas Instruments
Product Category:
Motor / Motion / Ignition Controllers & Drivers
RoHS:
Details
Product:
Stepper Motor Controllers / Drivers
Type:
Half Bridge
Operating Supply Voltage:
2.7 V to 10.8 V
Output Current:
0.6 A
Operating Supply Current:
1.7 mA
Minimum Operating Temperature:
- 40 C
Maximum Operating Temperature:
+ 85 C
Mounting Style:
SMD/SMT
Package / Case:
WQFN-16
Packaging:
Reel
Packaging:
Cut Tape
Packaging:
MouseReel
Brand:
Texas Instruments
Features:
Current Regulation
Moisture Sensitive:
Yes
Product Type:
Motor / Motion / Ignition Controllers & Drivers
Series:
DRV8833C
Factory Pack Quantity:
3000
Subcategory:
PMIC - Power Management ICs
Unit Weight:
0.000716 oz


Motor / Motion / Ignition Controllers & Drivers 1A Low Volt Stepper Sng/Dual DC Mtr Drv
DRV8833CRTER




Product Description


Title goes here.
* Dual H-Bridge Motor Driver With Current Control * 1 or 2 DC Motors or 1 Stepper Motor
* Low On-Resistance: HS + LS = 1735 mΩ
(Typical, 25°C)


* Output Current Capability (at VM = 5 V, 25°C) * PWP (HTSSOP) Package * 0.7-A RMS, 1-A Peak per H-Bridge
* 1.4-A RMS in Parallel Mode


* RTE (QFN) Package * 0.6-A RMS, 1-A Peak per H-Bridge
* 1.2-A RMS in Parallel Mode




* Wide Power Supply Voltage Range * 2.7 to 10.8 V


* Integrated Current Regulation
* Easy Pulse-Width-Modulation (PWM) Interface
* 1.6-µA Low-Current Sleep Mode (at 5 V)
* Small Package and Footprint * 16 HTSSOP (PowerPAD™) 5.00 × 6.40 mm
* 16 QFN (PowerPAD) 3.00 × 3.00 mm


* Protection Features * VM Undervoltage Lockout (UVLO)
* Overcurrent Protection (OCP)
* Thermal Shutdown (TSD)
* Fault Indication Pin (nFAULT)

The DRV8833C provides a dual-bridge motor driver solution for toys, printers, and other mechatronic applications.
The device has two H-bridges and can drive two DC brushed motors, a bipolar stepper motor, solenoids, or other inductive loads.
Each H-bridge output consists of a pair of N-channel and P-channel MOSFETs, with circuitry that regulates the winding current.
With proper PCB design, each H-bridge of the DRV8833C can drive up to 700-mA RMS (or DC) continuously, at 25°C with a VM supply of
5 V. The device can support peak currents of up to 1 A per bridge. Current capability is reduced slightly at lower VM voltages.
Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, UVLO, and
overtemperature. A low-power sleep mode is also provided.






Company Profile






0.0052 s.