DC motor, AC Gear motor Top drive motor (mechanical drive)
50~550 rpm 1 rpm
Magnetic Hall sensor
Turbine impeller(SUS 316L) Foam breaker(SUS 316L)
Microprocessor based PID
From 3 above the cooling water temperature to 80 (accuracy 0.1 )
The temperature is automatically controlled by the external heat exchanger system.
Ring sparger (SUS 316L)
The cartridge type sterilizable pleated type 0.2μm absolute filter is applied.
The same as inlet filter specification.(optional item)
Different vessel size and/or ordered specifications.
Materials & Finish
Using 316L stainless steel it is polished mechanically and/or electrically.
316L stainless steel prevents contamination and is polished by electrically.
O-rings / Gaskets
Viton or silicone material is used for the O-ring and the EPDM is used for the gasket.
8.5" Graphic Color LCD, Membrane keypad
Memory stick, printer, computer with the RS-232C communication protocol
Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system
The pressure is controlled manually and/or automatically
220V 50/60Hz single phase, 380V 50/60Hz three phase
pH, DO, Pressure, Temperature and Agitation speed
The head lift system is powered by air cylinder and guided by two sets of linear motion guide. The lifting load capacity can be adjusted and designed for the size of the head plate.